Maria
CRANKSHAFTS REPLACEMENT ON GENERATOR ENGINE TYPEYANMAR 6N280L - GN X
STITCHING OF BLOCK AUX/E YANMAR AND REBUILD OF CRANKCASE DOOR
STITCHING OF BLOCK AUX/E YANMAR
STITCHING OF SMELTING FURNACE CASING AND GEAR
STITCHING OF AUX/E CYLINDER COVER
WELDING OF GEARBOX CASING WITH SPECIAL ELECTRODES
Demo Service
CRANKSHAFT REPLACEMENT
The scope was the repairs of the three diesel generators Daihatsu Anquing - 6DK-20.
Main journals No.1,4 & 7 found with pitting & intense scratches which were polished away as much as permissible and possible. We used sandpapers of grade 100 up to 600.(STD:170mm).
Cylinder covers No.1 & 6 were overhauled and tested.
Air distributor was repaired. Starting valves were inspected also.
Gear of crankshaft (flywheel side) was worn and we recommend to be replaced.
Piston grooves No.1 & No.6 were inspected and found acceptable.
Connecting rod big end bearings No.1 & No.6 were inspected and found acceptable.
Piston pins and bush clearance No.1 & No.6 were inspected and found acceptable.
Liners No.1 & No.6 were inspected and Honing was carried out.
Thorough cleaning of sump tank carried out and all outfitting installation carried out.
Lub Oil filters were cleaned prior to running test.
Test was carried out with 450KW load with satisfactory results.
CRANKSHAFT POLISHING
Air distributor was repaired.
Starting valves were inspected also
Gear of crankshaft (flywheel side) was worn and we recommend to be replaced.
Piston grooves No.1 & No.6 were inspected and found acceptable.
Connecting rod big end bearings No.1 & No.6 were inspected and found acceptable.
Piston pins and bush clearance No.1 & No.6 were inspected and found acceptable.
Liners No.1 & No.6 were inspected and Honing was carried out.
Timing was carried out properly.
Thorough cleaning of sump tank carried out and all outfitting installation carried out.
Lub Oil filters were cleaned prior to running test.
Test was carried out with 450KW load with satisfactory results.